INNOKIN COOLFIRE Z80 KIT | Vape Wholesale

Click Image for Gallery

Description

INNOKIN COOLFIRE Z80 KIT

Innokin Coolfire Z80 Box Mod Kit developed by Innokin, The box mod received an ergonomic zinc alloy body, painted in four color combinations. The back side was rounded under the grip and decorated with a stitched artificial leather insert. A glossy control panel, consisting of a fire button, a display, a couple of small keys and a USB-C port, was stretched along the narrow front side. The landing site was limited to a diameter of 25 mm. Access to the battery compartment was limited by a twist-off cover with a hinged key.

A proprietary board with a power range from 6 to 80 watts is responsible for control and safety. In addition, preheat and an alternative Refresh mode are provided to refresh the flavor and extend the life of the winding. An external 18650 battery is used as a battery. Charging should be carried out via USB Type-C with a current of 1.7A. The available resistance ranges from 0.1 to 3.5 ohms.

The mod is accompanied by Zenith 2 with a 2ml protected flask. The filling hole is hidden under the rotating cover. The drip tip is realized in duplicate for different types of airflow. A pre-installed 0.3 ohm evaporator is located under the dome. In addition, there is an additional option with a resistance of 0.8 Ohm in reserve. The tightness can be adjusted by means of a ring on the base of the tank.

PARAMETERS:

Brand: Innokin

Unit: 1 Set

Device dimensions: Without tank: 83.55 * 38.30 * 27.60mm

With tank: 131.75 * 38.3 * 27.6mm

Color of product: Leather white, Cloudy grey, Leather black, Ash grey

Battery: External 18650 battery

Minimum / Maximum wattage: 6-80W adjustable

Minimum / Maximum voltage: 1-7.5V adjustable

F0 adjustment range Wattage: 6-80W; Hz: 20-100Hz

Cut off time: 3-18s adjustable

Tank: Zenith II